Forum Index
|
Picture of the Day
candoarms
John Deere Model 71 Planter
Unanswered Questions
Active Subjects
Hot Subjects
|
|
|
Click to Post a New Message!
Page [ 1 ] |
|
|
|
WTK: Pinion/king pin shaft orientation on front drive CaseIH 275MFD
I am in the process of installing new hubs on a Case IH 275 MFD 4 wheel drive tractor. My tractor was built by Mitsubishi and badged as a Case and use the same or very similar front drives.
My question concerns the pinion or king pin shaft that drives the front wheels, part #1962152C1. The splines on one end have a stop that prevents the gear from moving beyond a point on the shaft. The other end does not have this, the gear can move all the way to the bevel where the splines taper to the shaft toward the middle.
Should the end with the stop on the splines go to the top or to the bottom of the spindle.
I can send pictures if it helps and any help would be greatly appreciated.
Thank you in advance,
Mike
|
Bookmarks: |
|
|
|
| |
|
Page [ 1 ] | Thread 166639 Filter by Poster:
1
|
(Hunting and Sport Shooting)
Unanswered Questions
Active Subjects
Hot Subjects
Featured Suppliers
|
WTK: Pinion/king pin shaft orientation on front drive CaseIH 275MFD: Case -- Other Tractor Brands Discussion Forum
Digg It 
Del.icio.us 
Technorati 
Furl 
Stumble This 
