Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Webmaster,<br>Can't believe it...Just saw a

No wonder they are so "cheap"..I mean inexpensive at wallmart. "> Oil Filter
Parts and Repair
Replies 38 Post by MichaelSnyder

RCH,<br>I have one of the original Optimas in my '90 Acura. Cost me about $145 at that time. I haven't checked prices lately, but would assume they've come down a bit since then. Is it worth it....I would say 98%

Optima batteries
Parts and Repair
Replies 5 Post by MichaelSnyder

I am looking at a JD4400 4wd Hydro R4 tires with 430Loader,dual select control valve, 48Backhoe, 12

John Deere Pricing
John Deere Tractors
Replies 6 Post by Dave

Dennis - I have a Woods HBL72 I use with a JD4300. This is the old Gill line that Woods purchased, very similar to MonroeTufline GB4. Angle, tilts, offsets. <br>Very heavy, (500-600#) and very useful. I would trust both Woods and MonroeTufline.

monroe-tufline
Operating and Attachments
Replies 3 Post by RBinNC

I have seen some of these low mileage tractors around and for some reason the owners think they are worth what they paid for them and more! This is ridiculous when you can by a new tractor with warrantee for the same money. The used tractor is an older, discontinued model should be at least 20 - 25% less than a comparable new model. But I'll bet there is someone who didn't do his homework that ends up buying this tractor for several thousands too much.

price check J D 770
Other Tractor Brands
Replies 5 Post by Bob

Bill C, do a little surfing at http://www.kubota.com and at http://www.carverequipment.com for most of the information you are asking for.

Specifications for Kobota 3010 amp 3410
Kubota Tractors
Replies 5 Post by Bird Senter

I bought a loader blade from www.easternfarmmachinery.com for $900.00 (84

Blade to replace front bucket
Snowblowers / Snow Plows
Replies 26 Post by john

Our company exports secondhand tractor. Mostly unit would be in running condition. Brand like yanmar, kubota, etc were available. For more detail please contact us.

Second Hand Farm Tractor for export
Yanmar Tractors
Replies 2 Post by Lester Yew

I have distibuted Rollins cutters for last 4 years I have over 400 out. I now distribute more KING KUTTER than Rollins. compare the 2. both are rugged, simple & durable. ood value in either<br>Jim

Bush Cutter 60 quot Rollins
Mowers Field and Finish
Replies 2 Post by Jim

one horse power and more cubic inches should make it about equal if not more. Unless you ride around in circles so the pump is on demand all the time.

B7300 v B1700 mowing
Kubota Tractors
Replies 4 Post by art

Hello Bob. Offset is not the same as a wide blade because offset tends to push the tractor to the side. It is not as effient as a long blade, which has the advantage of centering the torque in the center of the tractor. If the tractor is light weight, an offset drives the tractor instead of the proper way around. That said, most 30 hp tractors struggle to pull enough material in an 8 foot blade to make it worth the effort. You can only pull an inch or so of constant depth in dirt with a small tractor pulling an 8' blade and it is hard to keep it spreading smoothly. But you know...your gravel drive might be the exception. If it is loose gravel then a light weight 8 foot blade might work. It would be worth a try. You might want to consider a light weight inexpensive 8' blade - because it is the reach you are after rather than the big job capability. Whatever you do, get a set of end plates for an angle blade. I use mine all the time for spreading dirt. If you put a little tilt to the blade, then the end cap makes it possible to spill the dirt under the blade instead of off the end.

angle blade size
Snowblowers / Snow Plows
Replies 4 Post by Roger L.

You should be able to do about $1,500 better. I paid about $16,000 for all you have except rear blade plus I bought foldable ROPS and box blade.

JD 4200 Price Check
John Deere Tractors
Replies 6 Post by Frank

I drained the fluid and cleaned the sump filter. It had some stuff on it but it wasn't too bad. I put new fluid in and its seems to be doing just fine. I Put a test gauge on each of the control lines feeding the loader and they all went up to about 2200 lbs. It looks like that did it. Thanks for the help and suggestion .....PETE

JD 1050 4WD with JD 80 Loader
John Deere Tractors
Replies 5 Post by Pete

Any ideas as to what the oil pressure should be on a Mitsubishi D2050?<br>Mine is over 70 psig and this seems high to me!

Oil Pressure
Parts and Repair
Replies 2 Post by Ed West

I have not used the new backhoe but have seen it up close and it appears very well made. The sub frame, cylinders, links, and controls all look as good as any in the class. I would love to have one for a few months.

Tractors
Kioti Tractors
Replies 4 Post by mario

Match the BCI group number that may be listed in your operator's manual. This wil insure the physical dimensions and post position of your replacement battery A good battery vendor will look this up for you too. If they can't, shop elsewhere. Match the CCA (Cold Cranking Amp) rating also found in your Op manual. This will guarantee proper cold starting capability. Then you can go shopping for the best deal. Clean all cable connections, including the posts on your new battery and the chassis end of the ground cable. If you match the BCI group (which I think is 24) you will avoid the hassels of modifying brackets because you don't have the right battery.

Battery
Other Tractor Brands
Replies 4 Post by RickB.

Call Galaxy Tire & Wheel in Malden, MA. 800-343-3476 Ask for Kevin. This company does a lot of turf conversions. Don't know if they will have what you want, but it's worth a try. Sid

Wheels-rims for ford 1720
Operating and Attachments
Replies 2 Post by Sid

When I checked on one to go with a 5310 the 10A was about $9000, if my memory serves me correct. Ended up with 4600 and JD backhoe. Dave

backhoe for JD 5000 series - 10A vs Woods equivalent
Loaders Back Hoes
Replies 3 Post by Dave Miner

McMaster Carr will sell 10 ft lengths of the hose you need and they accept credit cards and ship promptly. Look for Rough-N-Tough Rubber Hose. Part # for 7

http://www.mcmaster.com/
"> Source for 6 quot Leaf Vac Hose
Other Tractor Brands
Replies 5 Post by Ron

Hi Jerry<br>The tractor price new varies some $900 depending on the tires. The small Ag tires being the lowest priced. The tractor alone new is about 9K at a good price. And it will accept a loader. Make sure it has the syncro shuttle trany if you plan on going that route. check out http://www.kioti.com for more pricing options. good luck with it<br>mario

kioti 1914
Kioti Tractors
Replies 2 Post by mario