Go Bottom

Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Whiteshiftxx
Join Date: Jul 2015
Posts: 4 Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-08-11          193302


To gatoraider, Sir, do you still sell metal rollers for the primary clutch on the gator 4x2 ? If so, I would like to buy 2 sets. I am new to these computers so I do not know how to contact you other
than my email.It is Whiteshiftxx aol.




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
dbergan
Join Date: Feb 2017
Posts: 6 IA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-02-06          196240


Hello,
I am interested in rebuilding the primary clutch on a 2004 HPX Gator. Can anyone advise on how to do it and where to get the parts.
Thanks
....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
vaughn45
Join Date: May 2013
Posts: 11 Corpus Christi, Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-03-16          196388


I just finished rebuilding mine using drill bushings, with a bronze bushing pressed in. Had to bore the bronze bushings for the pin size. Worked for me. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Snooks
Join Date: Dec 2017
Posts: 5 Rock Hill SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-12-05          197303


Did you ever find the rollers I'm looking also ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
JLMiller
Join Date: Aug 2010
Posts: 32 Deerfield or Sanford, wherever the weather's nicer
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-12-06          197304


Have a look at the referenced thread for the process to get the job done. ....


Link:   Clutch Roller Replacement

 

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
vaughn45
Join Date: May 2013
Posts: 11 Corpus Christi, Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-12-06          197305


The process explained in the link above helped me tremendously. I purchased Drill bushings from Carr-Lane company. These are hardened bushings. I also purchased 3/8x7/16 oilite bronze bushings. Pressed them into the bushings and bored ID. to size. I had a 4 roller clutch and these worked just fine for me. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Snooks
Join Date: Dec 2017
Posts: 5 Rock Hill SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-12-06          197308


What size drill bushings (idXod) did you order , and have you any issues with the Gator potting out of forward gear under small load if so what's the fix. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
vaughn45
Join Date: May 2013
Posts: 11 Corpus Christi, Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-12-06          197309


I used 4 P-48-12 bushings. Specified a 7/16 dia. for the inside bushing bore. These are standard drill bushings fully hardened. I then ordered 4 7/16 inch OD. x 3/8 inch ID. pressure theated bronze bushings. Pressed them into the bushings and bored the ID. to final size. The part number specs out the OD. and Length. You supply the ID. that you want. These are every day standard bushings you can order threw McMaster Carr or any tooling company. Bronze bushings thru your bearing supply house.
As for the gator jumping out of gear, I just finished repairing mine. Sorry to say I had to go to ebay and buy my gears thru them and it was $584.00 if I rember right. I also bought the chain inside along with a new shifting block. The gear for the forward motion and the slider gear were both rounded off. Worked fine as long as you held it in gear, but put a load on it and it didn't like it to much. Three gears and two bearings is what you get. Hope this helps. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Snooks
Join Date: Dec 2017
Posts: 5 Rock Hill SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-12-07          197312


When you took the primary clutch off and remove the spider is the spider screwed on or pressed on the clutch ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
JLMiller
Join Date: Aug 2010
Posts: 32 Deerfield or Sanford, wherever the weather's nicer
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-12-07          197313


vaughn45 - Thanks for the specifics on the roller components. I'll add it to my ever-growing list of notations.

Snooks - As I recall, the spider was attached by three screws. It definitely wasn't pressed on. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Snooks
Join Date: Dec 2017
Posts: 5 Rock Hill SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-12-07          197314


Thanks just found out at does screwed on on right handed threads ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Seanathin48
Join Date: Mar 2020
Posts: 6 NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-03-04          198979


What year and model gator did you rebuild
your clutch on? Also you didnt say how long the rollers you made were, just the id and od. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Seanathin48
Join Date: Mar 2020
Posts: 6 NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-03-27          199020


Im looking for rollers for a 98 6x4 ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Coachlarry
Join Date: Apr 2016
Posts: 57 Southern californai
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-04-01          199037


I have always been able to find rollers for my clutches from the snowmobile sites. If you check around i bet you can find the rollers you need. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Trainpilot
Join Date: Mar 2015
Posts: 69 Ukiah, CA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-04-02          199040


When I replaced the rollers on our diesel 6x4 (mid 90"s vintage) I ordered bushings from McMaster-Carr. The length is easy to adjust--just order a little long and grind down. A 4-1/2" grinder with a flap whee and vise work well for this. The length is not that critical if you have good ID and OD. I'll look for part numbers and post if I can find them. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Trainpilot
Join Date: Mar 2015
Posts: 69 Ukiah, CA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-04-02          199041


I THINK the Mcmaster part number is 8491A363 . I suggest you check to see if they are at least close to what is needed. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Seanathin48
Join Date: Mar 2020
Posts: 6 NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-04-10          199049


Gas, not sure which clutch it is, no sticker left on it ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Metal rollers for 4x2 JD Gator primary clutch

View my Photos
Seanathin48
Join Date: Mar 2020
Posts: 6 NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2020-04-27          199114


Gas, not sure which clutch it is, no sticker left on it ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login