Go Bottom

Need Help Bad

View my Photos
jonesiera
Join Date: Jul 2003
Posts: 187 Bedford,In 47421
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-09-08          95959


I purchased a used Tandem Trailer with brakes on both axles(Electric)Problem: I have a 1996 2 wheel drive Chev. pickup and I would like some advice on what kind of Brake Control and wiring harness I need to operate the trailer brakes. My truck doesn't have a towing package and I assume no provision for brake control wiring connection. It now has a 4 prong flat connector for trailer lights only, and I need advice!! Thanks in advance
Bob Jones




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need Help Bad

View my Photos
AV8R
Join Date: Oct 2003
Posts: 882 North Central Wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-09-08          95961


I used the round 6-pin style. This is the "old" style. All the modern set-ups use a larger round seven pin style. This type of harness would be available from your chevy dealer, auto parts store or any camper shop.

You can also get an electric brake controller from a parts store or camper shop too. I made the mistake of buying a cheap Harbor Freight style controller for $60. A little more $ would get a nice control from a camper or trailer place too. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need Help Bad

View my Photos
n88wrl
Join Date: Jul 2004
Posts: 48 Clover, SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-09-09          96002


I'm sure you can get info on the wiring, perhaps from your dealer, but I've found one of the best brake controllers to be made by 'Prodigy'. (We tow horse trailers.) It is really nice in that it is not a timing-based controller - it is inertial. That is, it applies brake energy based on how hard it detects the vehicle stopping. Tap the brakes and you'll get very little braking energy. Stomp on them and it'll load 'em up. Very nice. Got mine at an RV shop online - shouldn't be hard to find. About $120.

-Brian ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need Help Bad

View my Photos
shortmagnum
Join Date: Nov 2003
Posts: 848 Wisconsin
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-09-09          96012


Uhaul is another option for finding brake controllers. They'll even install them for you. I have the cheaper timing type on my 2WD Ford and they work fine. You have adjustments for maximum braking force and the time it takes to apply the max force. You do find yourself pumping the brakes a bit more because the trailer will tend to get to the set maximum even if you are just applying the pedal lightly. If you adjust the controls for the weight you're pulling they work well.
Dave ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Need Help Bad

View my Photos
yooperpete
Join Date: Jan 2004
Posts: 1413 Northern Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-09-09          96016


Most truck accessory stores will sell and mount the brake controller for about $125.00 to $150.00. I usually go with whatever brand of contoller the store sells since they usually migrate to the one that gives them the least after the sale problems since they have to handle warranty issues. They can do this while you wait after you set your appointment. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login