SHIBAURA SD 2203
CECIL NEAL
Join Date: Posts: 1 |
2003-11-06 68147
LOOKING OR CLUTCH RELEASE BEARING, PILOT BEARING & CLUTCH DISC.
Reply to | Quote Reply | Add Photo
SHIBAURA SD 2203
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2003-11-07 68183
Leonard who posts here regularly usually says he can obtain Shibaura parts etc. Unless 2203's are a model that partially crosses to a Ford/NH or a parted out 2203 about the only alternative is to obtain parts from Japan and somebody who has experiences doing it is an advantage.
There also may be some potential to fix it up through rebuilding and OEM parts. Most bearings are fairly generic. There probably are codes stamped on the outside races and the bearings can be obtained through OEM suppliers. the pilot bearing is very likely available as an OEM part. The bearing portion of the throw-out bearing also may be an OEM part. I've never thought whether the bearing separates from the sleeve or not.
There are or used to be rebuilders for almost everything--clutches included. I don't know if these rebuilders turned out rebuilt discs by fabricating new disc material or whether generic blanks were available. It should be possible to find a clutch of the same diameter from something. If material can be applied, almost anything of the same diameter should work, but some better than others of course. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This