I Need help with hydraulic system on a Shibaura Sd2843t
Yeabuddy123
Join Date: Jul 2013 Posts: 6 Tennessee |
2013-07-16 187648
I have a Shibaura Sd2843t. And I was using it pretty hard the other day! It has front end loader too. But the lift arms on the back starting jerking (moving up and down about 1/4 inch) but makes the whole tractor jerk with the box blade on the back. When you move the lift lever it doesn't jerk until it stops where you want it then starts jerking again. But if you lift all the way up it doesn't jerk!! So I kept it all the way up yesterday so now when the tractor is not at full throttle the lift arms will slowly go down! So can anyone help my situation??
Reply to | Quote Reply | Add Photo
I Need help with hydraulic system on a Shibaura Sd2843t
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2013-07-16 187650
Make sure lift sensing rod is not loose. Next would be bad lift cylinder oring. ....
Reply to | Quote Reply | Add Photo
I Need help with hydraulic system on a Shibaura Sd2843t
Yeabuddy123
Join Date: Jul 2013 Posts: 6 Tennessee |
2013-07-16 187651
Are you talking about making sure the lift lever that is by my right leg isn't loose? And I don't know if it has lift cylinders cause its all internal! No cylinders on the out side of arms ....
Reply to | Quote Reply | Add Photo
I Need help with hydraulic system on a Shibaura Sd2843t
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2013-07-17 187656
There may be a rod going from the lift arm to the control to sense how high the arms are. The lift cylinder is in the housing under the seat. ....
Reply to | Quote Reply | Add Photo
I Need help with hydraulic system on a Shibaura Sd2843t
Yeabuddy123
Join Date: Jul 2013 Posts: 6 Tennessee |
2013-07-17 187658
Ok I will check when I get home. Ill let you know! You wouldn't think it's the filter would you ....
Reply to | Quote Reply | Add Photo
I Need help with hydraulic system on a Shibaura Sd2843t
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2013-07-18 187660
Does the loader work OK? ....
Reply to | Quote Reply | Add Photo
I Need help with hydraulic system on a Shibaura Sd2843t
Yeabuddy123
Join Date: Jul 2013 Posts: 6 Tennessee |
2013-07-18 187661
It was working fine for a few days after now it. Jerks very little while letting the front loader down! And the back arms r still jerking and. Now the back arms slowly go down while not at full throttle ....
Reply to | Quote Reply | Add Photo
I Need help with hydraulic system on a Shibaura Sd2843t
Yeabuddy123
Join Date: Jul 2013 Posts: 6 Tennessee |
2013-07-24 187713
Well I took the valve off for the back arms and check all o rings and blew out the lines it's still jerking bad! I'm running out of ideas!
Now the front loader is jumping only when letting the loader down. But stops when pump is under a strain Any ideas?? ....
Reply to | Quote Reply | Add Photo
Go Top
Share This