SD1540 hydrolic pump
peaemcay
Join Date: Oct 2008 Posts: 3 Gainesville,Fl |
2008-10-16 157316
I have a SD1540 and I need a pulley fed hydrolic pump,can anyone point me in the right direction to acquire one,
Thanks in advance, Phil
Reply to | Quote Reply | Add Photo
SD1540 hydrolic pump
candoarms
Join Date: Mar 2007 Posts: 1932 North Dakota Pics |
2008-10-16 157317
Peaemcay,
Start with the good folks at Surplus Center. They offer all kinds of hydraulic power solutions.
You have your pick of clockwise or counter-clockwise drive hydraulic pumps.......depending upon which side of the drive shaft you wish to mount your pump.
You can also specify pulley drive, and they'll line you up with a shaft suitable for your pulley.
You'll need to know the belt width "A", "B", etc.....as well as how many belts you'll be using to drive it.
If you plan on driving it with a set of two or more belts, be sure to ask for a "matched pair" of drive belts. Matched pairs are identical in length, since they're cut from the same master roll.
Two separate belts won't necessarily be the exact same length, making it nearly impossible to tension both belts properly. Having a matched pair makes tensioning two belts very easy.
See the link below.
Joel ....
Link: Surplus Center
 
Reply to | Quote Reply | Add Photo
SD1540 hydrolic pump
peaemcay
Join Date: Oct 2008 Posts: 3 Gainesville,Fl |
2008-10-17 157332
hey thank you very much Joel, ;-) ....
Reply to | Quote Reply | Add Photo
SD1540 hydrolic pump
rhardmeyer
Join Date: Apr 2009 Posts: 5 Placerville Ca |
2009-04-08 161836
I have the same tractor and I was told when I got mine that the Hydraulic pump was bad. the more research I did I found out It was not the hyd. pump It was the valve under the seat in the reaend housing (mine was on the right side under the seat area).I cleaned the valve out and readjusted it and now it works great.
I hope this helps you.
Bob ....
Reply to | Quote Reply | Add Photo
Go Top
Share This