Go Bottom

Loader adjustment

View my Photos
Wayne
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2001-06-08          29084


The loader on my Kioti tractor is approximately 3 inches lower on the left side. Is there a way to adjust this so my loader is level?



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Loader adjustment

View my Photos
Peters
Join Date: Feb 2002
Posts: 3034 Northern AL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2001-06-09          29112


Have you checked that all the bolts connecting the loader to the frame are tight? They often loosen up over time. Also check that you have not bent the supports or frame of the loader. If some one has tried to lift excess loads from one corner of the bucket then they can bend the structure. This is from experience as I bent and straighten a Bushhog loader I had. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Loader adjustment

View my Photos
TomG
Join Date: Feb 2002
Posts: 5406 Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2001-06-11          29143


I've heard of people putting a block under the low side of the bucket, applying down-pressure and then retorquing the frame bolts. Maybe somebody will comment if that is a standard procedure and if any risks exist. After the problem is solved, it probably would be a good idea to lift the front wheels with the bucket and inspect all welds on the frame for cracks. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login